|
Fine Filters are offline oil filtration systems with integrated circulating pump for off-line installation. The filters are recognized around the world as highly efficient purification systems for applications involving hydraulic oil, lubrication oil, gear oil, quenching oil, phosphate esters and more.
Fine Filters are ideal for controlling oil contamination levels for particles, water and degradation products (oxidation resin/sludge, varnish). The Depth Filters have a filtration degree of 3 microns absolute and a very large dirt-holding capacity.
Fine Filters deliver measurable customer benefits: lower operation and maintenance costs, increased productivity, and maximum lifetime for system components, in-line filters and oil. The modular filter units are built and sized to specific customer requirements - whether the oil volume is 2 litres or 200,000 litres.
EC Filter Inserts
Specially designed for adsorption of oil degradation products and reducing acidity
EC Filter Inserts are made for adsorption of oil degradation products, reducing varnish and acidity and increasing the resistivity of the oil. EC Filter Inserts contain Fuller´s Earth, a natural adsorbent primarily of aluminium silicates (clay minerals). Its large surface area enables enhanced non-selective adsorption of oil contaminants such as acidic oil degradation and oxidation by-products, resins, sludge, and varnish. The EC Filter Inserts may be used to remove varnish and acidic oil degradation products from high temperature oil and thus reduce the TAN and MPC values.
The EC Filter Inserts must be used in combination with cellulose Filter Inserts as post filters, either in the last stage of a HDU multi stay Filter or in a HDU single stay Filter using hybrid Filter Inserts.
Applicable in the following oils:
Mineral oil
Hydraulic fire resistant fluids (HFD)
Glycol oil - Polyalkylene glycols (PAG)
Ester oil - Polyolester oil (POE), Phosphate Ester oil, Environmentally acceptable Lubricants (EAL) and biodegradable oils
Used in the following applications:
Transformer insulation
Gear and bearing lubrication
Hydraulic systems
Compressor lubrication
Turbine lubrication
Engine lubrication
User benefits:
Reduction of TAN and MPC, Increase of Resistivity
EC Filter Inserts adsorb acidic oil degradation products and varnish, lower MPC and TAN and increase the Resistivity of the oil.
Prolonging the oil life time and avoiding oil change
EC Filter Inserts eliminate oil contaminants and oxidation catalysts, restore and maintain the oil in good condition.
Preventing failures and mitigating risk of downtime
Clean oil ensures reduced wear, extended component lifetime and lower O&M costs
Our filtration equipment is used in a wide range of industries:
Contact us | john Fimler Filter WeChat: +8613632692595 Whatsapp:+8613632692595 E-mail:4798742@qq.com |