dust filtration, coalescers, separators - we can all produce!
No matter which brand - we can produce!
No matter which model - we can produce!
You have needs - please contact us.
|
Fine Filters are offline oil filtration systems with integrated circulating pump for off-line installation. The filters are recognized around the world as highly efficient purification systems for applications involving hydraulic oil, lubrication oil, gear oil, quenching oil, phosphate esters and more.
Fine Filters are ideal for controlling oil contamination levels for particles, water and degradation products (oxidation resin/sludge, varnish). The Depth Filters have a filtration degree of 3 microns absolute and a very large dirt-holding capacity.
Fine Filters deliver measurable customer benefits: lower operation and maintenance costs, increased productivity, and maximum lifetime for system components, in-line filters and oil. The modular filter units are built and sized to specific customer requirements - whether the oil volume is 2 litres or 200,000 litres.
Clean lube oil with filter inserts
Your solution to the alternative method of maintaining lube oil on 2- and 4-stroke engines that enables you to achieve significant cost savings with simple uncomplicated technology while lowering the environmental impact by reducing energy and oil consumption. OEM demands for cleanliness are fulfilled at the same time as offering an exceptional operational economy to ship-owners. Protect hydraulic equipment by having clean oil with Filter Inserts.
Typical drivers for retrofitting this new technology is significant savings based on:
40-60% reduced oil consumption
99% lube oil sludge reduction
97% energy saving
Our program consists of 3 different Filter Inserts for clean lube oil:
Filter Insert LOX
for lube oil on 2-stroke low speed crosshead diesel engines
Filter Insert LO4D
for lube oil on 4-stroke diesel engines operating on distillate fuels
Filter Insert LO4R
for lube oil on 4-stroke diesel engines operating on residual fuels/HFO
LOX filter insert
Specially designed for lube oil on 2-stroke low speed crosshead engines
The LOX Filter Insert is specially designed for cleaning conventional lubricants on 2-stroke low speed crosshead diesel engine systems. Our focus is on fine filtration and the removal of oxidation products for long LO life as well as ensuring reliable operation of hydraulic multiway valves (FIVA, ELFI and ELVA type valves)
Compatible with engines operating on:
Distillate and blended fuel grades
Residual fuel grades
Dual fuel
LNG
BioFuel
Hydrogen
E-fuels
Contamination Capacities
The LOX Filter Insert has a well balanced dirt holding capacity and high filtration efficiency for optimum control of the contamination level, removing:
Wear particles
Oil degradation products
Asphaltenes
Varnish
Water
The LOX is designed especially for engine lube oil and gives superior results: very fine filtration, increased oil life and long filter insert life with better filtration than a centrifugal separator, and much lower oil and operation cost. Comprehensive field experience has proven a very long filter insert service life, keeping the level of insolubles below engine maker recommendations. Engines using LO as a hydraulic control oil for FIVA, ELFI and ELVA valves will experience more reliable operation and less wear on valves and pumps.
This specific LOX Filter Insert is applicable ONLY with below Oil Filters:
Lube Oil Filter for 2-stroke
low speed crosshead diesel engines
up to 20,000 kW
Lube Oil Purifier 27
for 2- & 4-stroke diesel engines
Lube Oil Purifier 427
for 2- & 4-stroke diesel engines
Your benefits with
Filter Inserts have the highest dirt holding capacity on the market due to special cellulose-based material. Furthermore, the unique construction of the bonded discs, creates a large filtration area resulting in reduced costs of ownership. The Filter Inserts are a modular design, which allows them to fit any applications and requirements.
The Filter Insert features:
Depth media of moulded cellulose
Highest Contamination Capacities (DHC)
100% natural cellulose fibres from sustainable resources;
no plastic, no metal, no chemical
Removal of contaminants, 4-in-1:
Particles:
Lifetime of both oil and component are increased considerably.
Oil degradation products:
Avoid sticking valves, lacquering, and varnish on metal surfaces.
Water:
Reduce the risk of micro-pitting, bacterial growth, sludge etc.
Acidity/TAN:
Reduce oil ageing and wear on equipment.
OEM requirements
Experience and application knowledge of ensure that solutions can meet specifications from OEMs on oil cleanliness.
How to ensure Clean & Dry oil
Remember to change Filter Inserts according to pressure gauge or at least once a year in order to ensure clean & dry oil! - Click here to learn how to replace a Filter Insert.
Our filtration equipment is used in a wide range of industries:
| Contact us | john Fimler Filter WeChat: +8613632692595 Whatsapp:+8613632692595 E-mail:4798742@qq.com |
